October 25, 2021 5:12 pm

How to Dig Out a Fence Post and Concrete Footing Using Hand Tools

Putting up new fence is a pain – and setting the posts is usually the hardest part of the job. Fortunately, the new post drivers available turn a backbreaking, time-consuming task into a painless one. In this article, we’ll talk about how to prep for post driving, some tips for driving post, and some maintenance and care tips to keep your post driver running in great condition.

Prep for Post Driving

Plan ahead – Choosing the appropriate time to run fence can make all the difference in the world. Be sure to drive post during times of  myblownews  the year when the ground is neither frozen nor arid. Post driving in the early spring will usually yield the best results. Make sure that the ground has some moisture. Moist dirt will allow the post to be driven easily and will make sure that the post is effectively secured.

Prep the Ground for Post Driving – if you must drive post in dry conditions, you can prep the area by digging a hole twice as wide as the post, and 10″ – 12″ deep at each post location. Fill each hole with water. Once the water is absorbed, you should be able to drive the post. If it’s still too dry, then just fill the hole with water again.

Don’t Sharpen the Post – sharpening a post allows it to be “pushed” out of the ground during the natural freeze and thaw seasonal cycles.

Tips for Driving Post

Prep the Driver – Before each use, be sure to “season” the springs. The post driver’s spring life can be extended by slowly raising and dropping the driver in small increments; gradually going higher with each strike. Do this for the first post each time you use the driver.

Place the Wide End First – by driving  redpokerjournal  the fat or wide end into the ground first, the post will be anchored better. This keeps the post from being pushed by seasonal freeze and thaw cycles.

Keep it Straight – You can actually drive a post “straight” once it goes crooked. By using the hand cranks or hydraulic base plate, you can either drive the post straight (in a similar manner to driving a crooked nail straight with a hammer), or you can use the side or back of the driver channel and pressure from the mount plate to force it straight. Either method may work depending on ground conditions.

Maintenance Tips

Don’t Lubricate the Driver Channel or Rails – Introducing lubrication or oil to the surface of the driver channel will attract material and debris to stick in the rail and cause the driver head to fall at a slower rate or bind due to the  thegrassjournal  added friction of the debris and material. The best way to make sure your driver keeps striking smoothly and quickly is to make sure the rail is dry and free of debris.

Oil the Springs before Storing – after each use, be sure to coat the springs with oil or gear lube before putting it away. Lubricating the springs will keep the spring coils from bonding together due to humidity and moisture. The lubricant allows the coils to evenly separate during the “seasoning” process, lengthening spring life.

When it comes to driving posts and putting up fence, Mutton Power Equipment in Fort Wayne, IN has everything you might need along the way. Visit our online store

Keeping people interested in your blog, whether it is a business or personal blog, is key to attracting a lot of regular visitors. Many blogs  vapeherald  have died because people have just lost interest. The main reason for the lack of interest is simply a lack of posts by the blogger. Regular, frequent posting, which will boost your blog’s ranking in search engines, is essential to the survival of any blog.

You might be asking yourself, what is frequent posting? How many blog entries should I make on a given week? How do I make frequent consistently good posts? What are the reasons for me to post frequently? In this newsletter, we will go over all of the above.

What is frequent posting?

Frequent blog posting is posting enough to keep your readers interested. Obviously, people will not want to come back to a blog that hasn’t been updated in months. They want to see consistent posting so that they know coming back to check the blog next week to see if there are more posts won’t be a waste of time.

How many blog entries should I make each week?

This is one of the tougher questions to answer. It really depends on the purpose of your blog. If it’s a personal blog, a weekly or twice weekly update is an excellent idea. A political/sports/music/religion blog should have 3-4 posts per week. Business blogs should have at least 2 posts, but preferably 4 each week.

The thing to remember is that quality counts. Posting frequently just for the sake of posting frequently tends to result in sub par posts which people won’t care about. It is important to find a balance frequent, quality posts that won’t result in burnout on your part. Why create 4 poor quality posts each week when you could post 2 quality posts per week?

How do I create quality postings on a consistent basis?

It’s all about following a consistent pattern of writing. Maybe you’re not a natural writer and this is difficult. That’s why we’ll give you an outline to help you.

 

 

Comments (0)

Leave a Reply

Your email address will not be published. Required fields are marked *